Residue builds up in every device over time. It clogs airflow, dulls flavour and makes parts harder to clean the longer you leave it. A proper soak every so often keeps things running the way they should.
What you need
- satinca Extra Strength Vape Cleaner 250mL
- satinca saniBasket (or a small bowl)
- Clean water and a lint-free cloth or paper towel
Step 1: Check your device instructions
Every device is different. Before you soak anything, check your manufacturer's cleaning instructions so you know which parts are safe to remove and soak. Never soak batteries or electronic components.
Step 2: Load the saniBasket
Remove the parts you want to clean and place them in the saniBasket. It holds glass, metal, plastic and silicone components together so nothing gets lost and you can lift everything out in one go.
Step 3: Add cleaner and soak
Pour 10 to 15mL of Extra Strength Cleaner into the basket so the parts are covered, then soak for 20 to 30 minutes. For stubborn residue, extend the soak in 5-minute intervals. Don't soak for more than one hour.
Step 4: Rinse and dry
Lift the basket out, rinse the parts thoroughly with water, then pat dry. Let everything air dry completely before you reassemble your device.
Safety first
The cleaner is highly flammable, so keep it well away from open flames, heat and ignition sources. Avoid contact with eyes and skin, keep it out of reach of children, and read the label before use. It's for adults only.
In between deep cleans
For quick wipe-downs on the go, satinca Vape Snap Cap Cleaners are pre-filled with 70% alcohol. Snap at the blue line and wipe. No bottle needed.
